材料特性对热障涂层合理压入深度的影响

基于有限元计算方法和量纲分析原理提出了热障涂层合理压入深度的确定方法,并研究了涂层及基体材料特性对合理压入深度的影响.首先,根据量纲分析原理提出了合理压入深度的无量纲表达式;其次基于锥形压头识别理想弹塑性材料的材料特性的方法,提出合理压入深度的确定方法;最后研究了各无量纲因素对合理压入深度的影响.研究发现基体的弹性模量对合理压入深度的影响最大,粘结层材料特性的影响较大,热氧化生成层的材料特性及基体的屈服极限对合理压入深度的影响不大.     

Cu-Zr-Ti块体非晶合金的形成及其力学性能

在Cu-Zr-Ti的三元合金系中发现了具有高非晶合金形成能力的Cu₆₀Zr_40-xTi_x(x=5%~27.5%,x为原子数分数)合金,采用铜模铸造法制备了块体非晶合金,其过冷液体温度区间为38~65?K.在该合金系中具有最高非晶形成能力的成分范围为Cu₆₀Zr_40-xTi_x(x=7.5%~12.5%),其非晶形成临界直径为5?mm,是Cu-Zr-Ti三元非晶合金中迄今为止非晶形成能力最高的合金.Cu₆₀Zr_40-xTix(x=7.5%~12.5%)块体非晶合金的杨氏模量、压缩断裂强度、压缩塑性应变和硬度分别为80~114?GPa,1?730~1?865?MPa,0.3%~1.5%和Hv 693~Hv 824,并随Ti含量的增加而提高.同时具有高非晶形成能力、高强度及显著塑性变形能力的铜基块体非晶合金的发现对非晶合金的基础研究和高性能结构材料的开发具有重要意义.     

丁羟推进剂粘合剂网络结构调控方法探讨

把扩链剂的使用作为调整丁羟推进剂粘合剂网络及其形态结构的一个重要手段。采用扩链剂、交联剂和真实固化参数(Rt)等综合的方法调控丁羟推进剂性能,可望比单纯控制名义固化参数(Ro)获得更好的力学性能及其稳定性。推导了丁羟推进剂粘合剂系统网络调整的通用计算公式和各种特定条件下的计算公式。     

Assessment of between-floor structural and topological properties on cognitive map development in multilevel built environments

The present study investigated cognitive map development in multilevel built environments. Three experiments were conducted in complex virtual buildings to examine the effects of five between-floor structural factors that may impede the accuracy of humans’ ability to build multilevel cognitive maps. Results from Experiments 1 and 2 (of three experiments) revealed that difficulties in developing multilevel cognitive maps are not solely caused by the z-axis offset, as is suggested in the literature, but are due to the factorial combination of a between-floor overlap and a z-axis offset. Results from Experiment 2 showed that this process becomes substantially more difficult when the reference directions between different floors have an angular offset from each other. Finally, results from Experiment 3 demonstrated that confusing between-floor heading shifts in aligned buildings did not make it reliably harder to build multilevel cognitive maps. The implications of these findings are discussed in terms of theories of mental representations in multilayered three-dimensional spaces, as well as for architectural design.     

Numerical investigation on flow and heat transfer characteristics of supercritical RP-3 in inclined pipe

Numerical simulations of flow and heat transfer to supercritical RP-3 through the inclined tubes have been performed using LS k–e model embedded in Fluent. The physical properties of RP-3 were obtained using the generalized corresponding state laws based on the fourcomponent surrogate model. Mass flow rate is 0.3 g/s, system pressure is 3 MPa, inlet temperature is 373 K. Inclination of the inclined pipe varied from -90° to 90°, with heat flux varied from 300 k W/m~2 to 400 kW/m~2. Comparison between the calculated result and the experimental data indicates the range of error reasonable. The results of ±45° show that temperature inhomogeneity in inclined pipe produce the secondary flow in its cross section due to the buoyancy force. Depending on the strength of the temperature inhomogeneity, there will be two different forms of secondary flow and both contribute to the convective heat transfer in the pipe. The secondary flow intensity decreases when the inhomogeneity alleviates and thermal acceleration will play a leading role. It will have a greater impact on the turbulent flow to affect the convective heat transfer in the pipe. When changing the inclination, it affects the magnitude of the buoyant component in flow direction. The angle increases, the buoyancy component decreases. And the peak temperature of wall dominated by the secondary flow will move forward and increase in height.     

A review of friction stir joining of SiCp/Al composites

SiCp/Al composites have excellent comprehensive properties and have been widely used in aerospace, automotive industry and other fields. Due to the huge difference in performance between SiC particles and matrix alloys, traditional fusion welding methods are difficult to meet the join requirements of SiCp/Al composites. Friction stir joining (friction stir welding), as a solid phase joining process, has been proved to be a new technology with fine prospect in joining SiCp/Al composites compared with fusion welding process. Although some progress has been made in recent years, there are still full of challenges. In this paper, the research status of friction stir joining of SiCp/Al composites in recent years is expatiated, including the weldability of SiCp/Al composites, the macrostructure and the microstructure of joints, mechanical properties of joints, and tool wear and monitoring. Furthermore, the existing challenges of friction stir joining of SiCp/Al composites are summarized and the future development directions are prospected.     

温度参数下轴编C/C复合材料的超高温热结构性能分析

为了研究轴编碳/碳（C/C）复合材料的超高温热结构性能,开展了2800℃超高温载荷下复合材料的拉伸实验,表征了复合材料组分材料的高温失效形貌;提出了立方体单胞和正六棱柱单胞的温度周期性边界条件的算法和预测复合材料等效热结构参数的方法,在材料属性各向同性正六棱柱单胞模型上验证了方法的正确性;最后建立了轴编C/C复合材料的代表性体积单元,计算了复合材料随温度载荷变化下的等效热结构参数,与实验数据进行了对比分析。分析表明：开展的轴编C/C复合材料的超高温拉伸实验,可以得到复合材料在2800℃载荷下复合材料的等效刚度值,同时分析了轴向试件和径向试件的高温失效机理,径向试件的纤维束拉伸强度对复合材料的径向拉伸强度起到决定性的作用。在应用位移以及温度周期性边界条件的基础上,提出的方法可以得到随温度载荷变化下复合材料的等效热结构参数,得出复合材料在横向满足近似各向同性的特性,预测结果表明只改变温度参数下复合材料的等效热导率不会发生改变。提出的方法同样也适用于其他编织复合材料的热结构性能研究。     

三维五向编织复合材料的冲击压缩特性及破坏机制

利用分离式霍普金森压杆(split Hopkinson pressure bar,SHPB)实验系统和高速摄像技术对三维五向碳/环氧编织复合材料的动态压缩特性进行研究。通过对编织角为22.3°的试样分别进行沿纵向和横向方向的冲击压缩实验,得到材料在200~1200 s^-1应变率范围内的应力应变曲线,并结合高速摄像记录的动态压缩过程,对不同应变率下材料在高速变形下的渐进破坏规律进行分析。同时,综合试样的宏观破坏特征和微观断口形貌特征,进一步分析材料的破坏模式及破坏机理。结果表明:随着应变率的增加,材料在纵向和横向均具有一定的应变率强化效应,在横向方向的应变率强化效应更为显著;不同加载方向下材料的渐进破坏过程、应力应变曲线特征以及破坏方式均具有明显差异,且随着应变率的增加而发生改变。     

TIG补焊对2219铝合金搅拌摩擦焊接接头微观组织及性能影响

通过对原始搅拌摩擦焊（FSW）接头中间位置进行缺口挖补以模拟焊缝缺陷,采用钨极氩弧焊（TIG）补焊对其进行焊缝缺陷修复试验,研究该补焊工艺对接头微观组织及力学性能的影响规律,为贮箱的FSW焊缝性能评价提供技术支撑和后续工程指导。结果表明,相较于FSW接头,补焊接头TIG焊缝区主要由较大的等轴树枝晶组成,且与FSW焊缝交界处相互掺杂着粗大等轴晶和细小等轴晶;补焊接头固溶区受热循环影响较大,晶粒较为粗大,而过时效区受热循环影响较小,会发生过时效化并形成软化区。补焊接头抗拉强度与延伸率相较于原始FSW接头有所降低,硬度分布大致呈“W”形,WNZ区为硬度值最低处;补焊接头断裂位置始于焊趾处,断口存在大量韧窝,同时韧窝内存在第二相粒子,呈现韧性断裂机制。     

高能合成煤油GN-1性能研究 --“液体火箭推进”专刊

结合火箭发动机工程应用环境,研究了GN-1煤油高温高压热物性、安全特性、传热结焦性能以及点火延迟性能,并和现役火箭煤油作了对比分析。采用商业仪器对GN-1煤油在最高200℃、最高压力25MPa范围内的密度、黏度、定压比热容、导热系数、表面张力进行了实验测量。在实验数据的基础上,依据基团贡献法、基于比容平移法则的P-R方程、摩擦理论、广义对应态原理分别对GN-1煤油在最高350℃、最高压力60MPa范围内的密度、黏度、定压比热容、导热系数、表面张力进行了理论计算,建立了GN-1煤油的密度方程、黏度方程、导热系数方程,并将方程的计算值与实验值进行了对比,计算偏差较小。对GN-1煤油和火箭煤油的安全性能进行对比研究,GN-1煤油的闪点为40℃,自燃温度为305℃,高于火箭煤油(225℃);燃点为47℃,低于火箭煤油(82℃),GN-1煤油的爆炸极限范围为0.44%-2.9%（40℃）。GN-1煤油和火箭煤油的急性经口毒性LD50＞5000mg/kg,均属于第五级化合物（实际无毒）。在入口压力10 MPa,流速10 m·s-1,内壁温480℃条件下,GN-1煤油的传热系数比火箭煤油提高14.4%,建立了传热准则方程。GN-1煤油出口油温220℃时试验段平均结焦速率是出口油温150℃时的4.43倍,GN-1煤油不锈钢材质管路中试验段平均结焦为高合管材质管路中的22.3%。在970K-1105K温度范围内,GN-1煤油的点火延迟时间为320μs-471μs,是火箭煤油的55.6%-69.3%。相关研究可对发动机可靠设计及应用提供重要参考。